Changes to Step #10
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Shifter Installation |
| + | [* 1] Install the shifter cable end links onto the shifter. |
| + | [* 1] Be sure to sandwich the end link between the two plastic washers. |
| + | [* 1] Use the retaining clip to hold them in place. |
| + | [* 1] Reattach the wire harness to the shifter. |