Skip to main content

Changes to Step #10

Edit by David Cordell

Edit approved by David Cordell

Before
After
Unchanged

Step Lines

+[title] Shifter Installation
+[* 1] Install the shifter cable end links onto the shifter.
+[* 1] Be sure to sandwich the end link between the two plastic washers.
+[* 1] Use the retaining clip to hold them in place.
+[* 1] Reattach the wire harness to the shifter.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added

Image 3

No previous image

New image

Added