Changes to Step #3
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the collar |
|---|---|
| + | [* 2] After you have the boot collar secured to the fabric, press the inner sleeve upward and remove it from collar. Slide the boot and collar down onto the shift rod. |
| + | [* 5] Thread the stainless steel sleeve onto the rod. |
| + | [* 1] Once you have your shift knob threaded on, use a wrench to tighten the stainless steel sleeve against the knob, locking it into place. |
| + | [* 6] Slide the collar up and it will clip into place. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added