Changes to Step #2
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the boot collar |
|---|---|
| + | [* 1] Since this is a universal part, you will need to remove the shift boot from your console and remove the stock collar. |
| + | [* 2] Fold the shift boot inside out and slide the collar all the way in until it comes out the other end. |
| + | [* 6] Once you have the sleeve in place, stretch the elastic band around the fabric, securing it to the boot. |
| + | [* 10] You should use the elastic band included with the collar kit. Some factory cars use thin zip-ties to secure the fabric but these are bulky and can wear the outside of the boot quickly. |
Image 1
No previous image
Added
Image 2
No previous image
Added