Changes to Step #13
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Next you will need to remove the studs from the throttle body port on the intake manifold. |
|---|---|
| + | [* 1] Use the two 12mm nuts that held the throttle body in place and place them face to face, as shown in the picture. |
| + | [* 1] Tighten the two nuts together, this will lock the nuts together. |
| + | [* 1] Turn the outer nut to remove the stud. Repeat for both studs. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added