Changes to Step #12
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Remove the two 12mm bolts and two 12mm nuts that mount the throttle body to the intake manifold. |
|---|---|
| + | [* 1] Remove the stock throttle body, the gasket will remain attached to the throttle body. |
| + | [* 1] Un-clip the harness from the lower bracket on the throttle body. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added