Changes to Step #11

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[* 1] Unclamp and remove the vacuum hose for the purge control valve solenoid from the throttle body.
-[* 1] Remove the coolant lines from the throttle body.
-[* 9] ''There is coolant inside of the lines. Be sure to drain the system before disconnecting, or loop the system.''
+[* 2] Remove the coolant lines from the throttle body.
+[* 9] ''There is coolant inside of the lines. Be sure to drain the system before disconnecting, or loop the system. ''