Changes to Step #13

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[* 1] Re-install the fuel rail with the new injectors. Evenly push on the fuel rail to insure you evenly seat the injectors into the intake manifold.
-[* 10] ''Use a small amount of fuel or oil on the injector o-rings to ease in the installation of the injectors into the manifold. ''
+[* 10] Use a small amount of fuel or oil on the injector o-rings to ease in the installation of the injectors into the manifold.
[* 1] Re-install the 12mm nuts to tighten down the fuel rail.