Changes to Step #12

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[* 1] Insert injectors into the ports of the fuel rail. Make sure the wire harness connection clips are on the opposite side of the fuel rail mounting points.
-[* 10] ''Fuel or a small amount of oil applied to the o-rings will ease the installation of the injectors into the fuel rail.''
+[* 10] Fuel or a small amount of oil applied to the o-rings will ease the installation of the injectors into the fuel rail.
[* 1] Install the quick disconnect fuel line connection clip.