Changes to Step #12
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Insert injectors into the ports of the fuel rail. Make sure the wire harness connection clips are on the opposite side of the fuel rail mounting points. |
| + | [* 10] ''Fuel or a small amount of oil applied to the o-rings will ease the installation of the injectors into the fuel rail.'' |
| + | [* 1] Install the quick disconnect fuel line connection clip. |