Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Use a 10mm socket to remove the two nuts that hold the upper engine cover in place. |
|---|---|
| + | [* 1] Remove the engine cover. |
| + | [* 10] If you are installing an aftermarket fuel rail as seen in this guide, you will not be able to re-use the factory engine cover. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added