Changes to Step #10
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Open the retaining clip and carefully slide it into the groove on the backside of the cable bushing. |
|---|---|
| + | [* 1] Install the supplied cotter pin. |
| + | [* 1] The shifter cable bushings are installed! |
| + | [* 11] Re-install the items you removed, follow these steps in reverse order. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added