Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Install the Hybrid Racing bushing with the logo side up. |
| + | [* 1] Open the retaining ring and carefully slide into the groove on the bottom of the cable bushing. |
| + | [* 10] Be sure to slide the retaining ring around to ensure it holds the bushing in place. |
| + | [* 1] Install the supplied cotter pin. |