Changes to Step #5
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] With a pair of needle nose pliers, remove the cotter pin from the top of the large cable bushing. |
| + | [* 1] Remove the top metal shim. |
| + | [* 1] With a flat tip screw driver, pry the OEM rubber bushing out of the metal cable end. |
| + | [* 9] Be careful not to twist or bend the cable in any extreme position. This can permanently damage the shifter cable. |