Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] D-Series & B16 (all except B16B) | |
| [* 1] Use the supplied hardware listed in Step 1 and connect the shifter to the linkage. Be sure to use both flat washers and torque the nylon nut. | |
| - | [* 10] Torque Spec: 16 lb-ft |
| + | [* 10] Torque Spec: ***16 lb-ft*** |
| [* 11] The lower linkage bearing should spin freely after being tightened. | |
| [* 9] Due to the various types, shapes and brands of linkages, some bending/shaping of the eyelet may be necessary. Even brand new OEM Honda linkages are slightly wider than they should be. |