Changes to Step #3

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] D-Series & B16 (all except B16B)
-[* 1] Use the supplied hardware listed in Step 1 and connect the shifter to the linkage.
-[* 1] Be sure to use both flat washers and torque the nylon nut to 16ftlb.
+[* 1] Use the supplied hardware listed in Step 1 and connect the shifter to the linkage. Be sure to use both flat washers and torque the nylon nut.
+[* 10] Torque Spec: 16 lb-ft
[* 11] The lower linkage bearing should spin freely after being tightened.
[* 9] Due to the various types, shapes and brands of linkages, some bending/shaping of the eyelet may be necessary. Even brand new OEM Honda linkages are slightly wider than they should be.