Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] D-Series & B16 (all except B16B) |
|---|---|
| + | [* 1] Use the supplied hardware listed in Step 1 and connect the shifter to the linkage. |
| + | [* 1] Be sure to use both flat washers and torque the nylon nut to 30ftlb. |
| + | [* 11] The lower linkage bearing should spin freely after being tightened. |
| + | [* 9] Due to the various types, shapes and brands of linkages, some bending/shaping of the eyelet may be necessary. Even brand new OEM Honda linkages are slightly wider than they should be. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added