Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Mount Shifter Base to Linkage | |
| [* 1] Mount the shifter base to the top of the linkage by using the supplied bolts and nylon washers. | |
| - | [* 10] Torque spec: 7 lb-ft. |
| + | [* 10] Torque spec: ***7 lb-ft***. |
| [* 9] If you choose to install the third mounting bolt, you must mark and drill a new hole in linkage. This is recommended for racing cars. |