Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Mount Shifter Base to Linkage |
|---|---|
| + | [* 1] Mount the shifter base to the top of the linkage by using the supplied bolts and nylon washers. |
| + | [* 10] If you choose to install the third mounting bolt, you must mark and then drill the linkage. This is recommended for racing cars. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added