Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Identify Hardware Combination | |
| [* 1] Your shifter assembly comes with a pack of hardware. The hardware combination you use will depend on which type of shift linkage you are installing the shifter on. | |
| - | [* 2] Use these parts to mount the shifter base to the D-Series & B16A ( US & JDM) linkage. (x3) M6x1 nylon locking nuts, (x3) |
| - | [* 6] Use these parts to mount the shifter base to the B18 & B16B ( US & JDM) linkage. (x3) M6x1 nylon locking nuts, (x3) |
| + | [* 2] Use these parts to mount the shifter base to the D-Series & B16A ( US & JDM) linkage. (x3) M6x1 nylon locking nuts, (x3) M6x1x18mm stainless bolt, (x2) M8 Flat Washer, (x1) M8x1.25x50mm, stainless bolt (x1) M8x1.25 nylon locking nut. |
| + | [* 6] Use these parts to mount the shifter base to the B18 & B16B ( US & JDM) linkage. (x3) M6x1 nylon locking nuts, (x3) M6x1x18mm stainless bolt, (x2) M8 Flat Washer, (x1) M8x1.25x60mm stainless bolt, (x1) M8x1.25 nylon locking nut & stainless steel pivot spacer. |
| [* 10] You will only use one of the long bolts. If you do not understand what bolts to use, please call us. ***225-932-9588*** |