Skip to main content

Changes to Step #9

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Door Panel Installation
[* 1] Install door panel in reverse order of removal.
[* 1] Connect door handle before window switch. If done in the other order, the wiring for the window switch will limit the amount of room available to install the door handle.
[* 1] Place the lip on the top of the panel over the top of the door frame. Allow the panel to rest in place. Then carefully push the panel down.
[* 1] Ensure that the panel is flush with the door and window seals at the top left and right corners. This is a good gauge of whether or not the panel is correctly slipped at the top of the frame.
- [* 1] Check to ensure that clips are lined up with respective holes. To finish connecting panel to frame lightly hit panel behind clips to engage them.
+ [* 1] Check to ensure that clips are lined up with respective holes. To finish connecting panel to frame, lightly hit panel behind clips.