Changes to Step #7

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[title] Striker Installation
-[* 1] Install the new striker by feeding it into the door through the hole for the speaker.
-[* 1] Thread the two 10mm bolts that hold the striker to the door. Once tight, slowly shut the door in order to line the striker up with to bolt hole on the chassis. Then thread and tighten the 12mm chassis bolt.
+[title] Stop Installation
+[* 1] Install the new stop by feeding it into the door through the hole for the speaker.
+[* 1] Thread the two 10mm bolts that hold the stop to the door. Once tight, slowly shut the door in order to line the stop up with to bolt hole on the chassis. Then thread and tighten the 12mm chassis bolt.