Skip to main content

Changes to Step #6

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[title] Striker/Stop Removal
-[* 1] The striker is held to the door by two 10mm bolts, and to the chassis by one 12mm bolt.
+[title] Stop Removal
+[* 1] The stop is held to the door by two 10mm bolts, and to the chassis by one 12mm bolt.
[* 1] Remove the 12mm bolt on the chassis first. The door can now swing wider, allowing access to the 10mm bolts on the door.
[* 1] To remove stop from the door, pull the stop out through the hole for the speaker.