Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Door Panel Removal Cont'd | |
| - | [* 1] Once the three screws in the previous step are removed, the door panel is only held |
| + | [* 1] Once the three screws in the previous step are removed, the door panel is only held by clips. |
| [* 1] To disengage the clips, take a wider interior panel removal tool and pry along the bottom of the door panel. | |
| [* 1] Once the door panel is removed at the bottom, push or pull up on the panel. This will disengage the clips at the top of the panel. | |
| [* 1] Note: There will be two cables for the door handle and one electrical connector for the window switch. |