Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Door Panel Removal Cont'd |
---|---|
+ | [* 1] Once the three screws in the previous step are removed, the door panel is only held in the clips. |
+ | [* 1] To disengage the clips, take a wider interior panel removal tool and pry along the bottom of the door panel. |
+ | [* 1] Once the door panel is removed at the bottom, push or pull up on the panel. This will disengage the clips at the top of the panel. |
+ | [* 1] Note: There will be two cables for the door handle and one electrical connector for the window switch. |
Image 1
No previous image
Added
Image 2
No previous image
Added