Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Using a plastic pry tool or flathead screwdriver, work your way around the edge of the shifter cable seal. |
| + | [* 1] Once the seal is loose it should just pop out. This is the last thing holding the cables to the car. |
| + | [* 1] Remove the cables completely. Let the shifter side of the cables hang and slide the transmission side out through the bottom. |