Changes to Step #5
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Add FPG & check for leaks |
|---|---|
| + | [* 1] Finish the install by placing an FPG in your desired location and making sure ALL of the fittings are tight. |
| + | [* 9] Cycle the key a few times an allow the pressure to build at the FPR. Keep in mind that if your car hasn't run in a while it will take a few cycles of the key before you will see pressure. Once you are leak-free, set fuel pressure to 52PSI. |
Image 1
No previous image
Added