Changes to Step #4
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Mount the FPR |
---|---|
+ | [* 1] Determine the location of your fuel pressure regulator. This location can vary so mount it where you want. Make sure the lines will reach the hardlines. |
+ | [* 1] Once you have determined the location and mounted your FPR, cut the factory fuel hardlines to a proper length. Use a tube cutter and file down any burrs. |
+ | [* 1] Connect lines (C) and (D) to the hardlines and secure them with the supplied clamps. |
+ | [* 10] The line capped in the image is the fuel tank vent line (or charcoal canister line.) It is capped to prevent debris from entering the tank. ***DO NOT KEEP THIS LINE CAPPED OR PLUGGED.*** It must be open to vent at all times. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added