Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Identify your parts |
---|---|
+ | [* 1] Start by identifying all of the necessary parts to complete this install. Lines, fuel rail and fuel pressure regulator. |
+ | [* 1] This line kit is designed to work with the Hybrid Racing fuel rail, but may work with other center-feed rails as long as the correct fittings are used. |
+ | [* 1] Fuel line (A) connects the center port of the rail to one end of the inline fuel filter. Line (B) connects to the other end of the inline fuel filter and the FPR (port 3). |
+ | [* 1] Fuel line (C) connects to port 1 on the FPR and then to the feed fuel line from the chassis. Line (D) connects to port 3 (return) of the fuel line and then to the factory return hardline in your chassis. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added