Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Finish Line! |
| [* 1] Once you are happy with the shifter movement, be sure to tighten the locking nuts and the shifter base bolts. | |
| [* 1] You can now reinstall the dash cover and center console. Use steps 1-10 in this guide as a reference. | |
| [* 10] If you choose to install the shift boot, it may be necessary to trim a section of the plastic retaining ring depending on your throw adjustment. Shifters set to the longest throw setting may contact the plastic ring. |