Changes to Step #12
Edit by HRKendall —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Shifter Installation | |
| [* 1] Install the shifter cables into the shifter base by rotating and sliding them in through the side. | |
| [* 1] Make sure both shifter cables are installed and are tight to the base. | |
| + | [* 1] If you are finding it difficult to slide the cables into the shifter you can remove the entire shifter mechanics by loosening the 4 bolts that hold the shifter to the base. With this removed you should have more room to get the cables seated into the shifter base. |