Changes to Step #8
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Drill Hole(s) |
---|---|
+ | [* 1] Using the supplied vacuum fittings as a guide, drill holes in the intake tube where you marked. Be sure to start with a smaller hole before going larger. It is always possible to enlarge a hole, it is impossible to make it smaller once it has been drilled. |
+ | [* 1] The VC breather hose and AAV connections are optional. ***The IAT MUST be installed. *** |
+ | [* 9] Be sure to CLEAN the air intake system before installing it. Compressed air works best. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added