Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Intake Air Temp Sensor |
|---|---|
| + | [* 6] The Intake Air Temperature sensor is required for normal operation. You ***MUST*** mark and drill a hole in the tube. The location should be near the throttle body inlet for the most accurate reading. |
| + | [* 1] Once you have chosen and marked a location on the tube, remove it from the car. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added