Skip to main content

Changes to Step #4

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

+[title] Install HR Upper Cooling Hose
+[* 1] Find a suitable jack point and raise the car enough to slide a drain pan under the radiator.
+[* 1] Remove the radiator cap and drain roughly 1 quart of coolant. Drain just enough so you can remove the upper rad hose without making a mess in your engine bay.
+[* 9] Use a clean pan or tray if you plan to reuse the coolant.
+[* 1] Remove the OR upper radiator hose.
+[* 1] Install the provided HR upper cooling hose. You can use the factory hose clamps, or replace them with our stainless T-bolt clamps. (sold separately)

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added

Image 3

No previous image

New image

Added