Changes to Step #11
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Notes |
|---|---|
| + | [* 9] ***DO NOT REMOVE THE GRAPHITE COATING *** |
| + | [* 1] The graphite coating is in place to prevent unwanted from air passing around the throttle plate. Removing this can cause idle issues. |
| + | [* 11] Once the throttle body has been installed on the engine, calibrate the TPS and start the engine. Check for coolant or air leaks before driving. |
Image 1
No previous image
Added