Changes to Step #10
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 9] ++All Hybrid Racing throttle bodies are calibrated, sealed and locked before they are shipped to customers.++ Each unit is sealed and tested to ensure a leak-free butterfly. If you MUST adjust the idle set screw please understand this ***CAN*** affect how the car idles. If you are ***NOT*** using an IACV, this*** CAN*** result in idle surges. |
|---|---|
| + | [* 10] Adjust the idle screw ***ONLY*** if you are NOT using an ***IACV***. |
| + | [* 9] If you ARE using the IACV and are experiencing idling issues, do NOT adjust this screw. |
| + | [* 3] Loosen the locking nut on the throttle plate stop screw. These parts have thread lock on them. |
| + | [* 2] Thread the throttle plate stop screw inward, therefore opening the throttle plate. Once your desired idle has been achieved, apply thread lock and fully tighten the nut. |
Image 1
No previous image
Added
Image 2
No previous image
Added