Changes to Step #9
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Throttle Cable |
|---|---|
| + | [* 5] Begin by threading one of mounting nuts and rubber boot down towards the end of the cable. Insert the throttle cable through the bracket bolted to your HR throttle body. |
| + | [* 2] Insert the cable end into the throttle body rotor. |
| + | [* 4] Insert the cable into the throttle body rotor groove so the cable is in line with the mounting bracket. |
| + | [* 10] Disconnecting the throttle cable from the pedal assembly can aid in installation. |
| + | [* 3] Thread the backing nut towards the throttle cable and adjust the cable placement so that the butterfly is fully open when the pedal is depressed to its maximum. |
| + | [* 3] Tighten the throttle cable nuts together holding it to the throttle body bracket. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added