Changes to Step #5
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Idle Air Control Valve Install | |
| [* 9] If you ***ARE*** using the idle air control valve (IACV) you will ***NOT*** be using the supplied 1/8th NPT plugs. | |
| [* 1] Remove the IACV from your OE throttle body and place it into the machined groove on the lower section of your HR throttle body. | |
| [* 1] Use the two supplied bolts and secure the IACV to the housing. | |
| - | [* 10] If you need to rotate the IACV so that the connector faces inward, do that now. (Factory configuration shown) |
| + | [* 10] If you need to rotate the IACV so that the connector faces inward, do that now. (Factory configuration shown) If you choose to rotate the IACV, do ***NOT*** connect the coolant line. |