Changes to Step #5
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Idle Air Control Valve Install |
|---|---|
| + | [* 9] If you ***ARE*** using the idle air control valve (IACV) you will ***NOT*** be using the supplied 1/8th NPT plugs. |
| + | [* 1] Remove the IACV from your OE throttle body and place it into the machined groove on the lower section of your HR throttle body. |
| + | [* 1] Use the two supplied bolts and secure the IACV to the housing. |
| + | [* 10] If you need to rotate the IACV so that the connector faces inward, do that now. (Factory configuration shown) If you choose to rotate the IACV, do ***NOT*** connect the coolant line. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added