Changes to Step #19
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Next we need to install the bracket I said to hold on to in step 4. |
|---|---|
| + | [* 1] First slide the cables onto the bracket but do not close the bracket or put the clamping bolt in. |
| + | [* 1] First using a 10mm socket put the (2) M6 bolts in the bracket and tighten it to the car. |
| + | [* 1] Next, adjust the cables as needed around the exhaust and install the M6 clamping bolt with a 10mm boxed-end wrench and tighten as illustrated. |
Image 1
No previous image
Added