Changes to Step #18

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[* 10] Next we need to move back under the car to install the mounting plate back to the bottom of the car.
+[* 1] Next we need to move back under the car to install the mounting plate back to the bottom of the car.
[* 1] Slide the plate back on the studs and using a 10mm socket put the (2) nuts on to hold it in place.
[* 1] Before tightening these nuts make sure the rubber seal is aligned with the plate correctly as illustrated .
[* 9] You should NOT see any rubber being squeezed out of the sides.