Changes to Step #18
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 10] Next we need to move back under the car to install the mounting plate back to the bottom of the car. |
|---|---|
| + | [* 1] Slide the plate back on the studs and using a 10mm socket put the (2) nuts on to hold it in place. |
| + | [* 1] Before tightening these nuts make sure the rubber seal is aligned with the plate correctly as illustrated . |
| + | [* 9] You should NOT see any rubber being squeezed out of the sides. |
Image 1
No previous image
Added