Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Moving back into the interior, pull the cables up to the shifter making sure that you have them going to the correct side. |
|---|---|
| + | [* 11] NOTE: One of the endlinks has a yellow dot on it, make sure it goes on the rear of the shifter. |
| + | [* 1] Once you have them on the correct side, push the end links on to the shifter until the wire clips snap on. |
| + | [* 1] Make sure that cables fit straight on as illustrated, if they do no not you may have to flip the end link on the transmission side or they can be adjusted (Explained in following step) |
Image 1
No previous image
Added