Changes to Step #11

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

+[* 1] Now that we have the new springs installed, we can re-install the shifter arm assembly back in the transmission.
+[* 1] Before doing so, clean the old Honda bond off of the base and re-apply new Honda bond evenly with your finger as illustrated in Fig 11.
+[* 1] Now slide the shifter arm assembly back into the transmission, put the (4) M6 bolts back in their original places and tighten. Using your 8mm allen key put the lower interlock bolt  back in and tighten, and plug the reverse light switch plug back as well.

Image 1

No previous image

New image

Added