Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Slide the console |
|---|---|
| + | [* 1] Now that the center console is not attached, slide it into the back seat to give yourself room to remove the cables from the shifter. |
| + | [* 1] First, using your two thumbs separate the wire clips holding the endlinks on the shifter and slide them off of the ball joints(Fig 1). |
| + | [* 1] Second, you need to the remove the two bushings located at the base of the shifter by rotating them counter-clockwise and sliding out the side(Fig 2/3). |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added