Changes to Step #6
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove bolts using 8mm nut driver |
|---|---|
| + | [* 1] Next you will need to use your 8mm nut driver to remove the (4) bolts that hold the center console down. |
| + | [* 1] The front (2) are right in front of the shifter as seen in Fig 1, and to get to the rear (2) you must open the center console compartment and remove the rubber mat to get to them as seen in Fig 2. |
| + | [* 1] For more instructions, click this link: [guide|107|How to remove bolts using 8mm nut driver] |
Image 1
No previous image
Added