Changes to Step #4
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Remove mounting brackets | |
| [* 1] Once you have removed the heat shield, you will need to remove the (2) mounting brackets and the mounting plate using a 10mm socket. | |
| - | [* 1] For the front bracket remove the (2) M6 bolts( Fig 1). |
| + | [* 1] For the front bracket, remove the (2) M6 bolts( Fig 1). |
| [* 1] For the middle bracket, remove the (2) nuts (Fig 2), for now, the brackets may be left attached to the cables. | |
| [* 10] Before removing the mounting plate, mark the orientation of the plate with a sharpie. | |
| [* 1] Then remove it by removing the (2) nuts and sliding the plate off the studs (Fig 3). |