Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove the heat shield |
|---|---|
| + | [* 1] Next you will need to remove the heat shield for the exhaust Using a 10mm socket or nut driver, remove the (4) M6 bolts and (2) nuts pictured and rotate the heat shield out from behind the exhaust(Fig 3A/3B). |
| + | [* 10] Depending on your exhaust set up, removal of a catalytic converter or midpipe may be required to gain access to this heat shield. |
Image 1
No previous image
Added
Image 2
No previous image
Added