You're viewing a previously published revision of this guide.  View latest revision

Older
Jul 23, 2014 - 02:07:36
Oct 07, 2014 - 03:10:15 Aug 07, 2014 - 12:08:43 Aug 06, 2014 - 11:08:16 Aug 06, 2014 - 11:08:14 Jul 24, 2014 - 02:07:20 Jul 23, 2014 - 03:07:58 Jul 23, 2014 - 02:07:35 Jul 23, 2014 - 02:07:36 Jul 23, 2014 - 02:07:02 Jul 23, 2014 - 02:07:07 Jul 23, 2014 - 02:07:51 Jul 23, 2014 - 02:07:15 Jul 23, 2014 - 02:07:39 Jul 23, 2014 - 02:07:36 Jul 23, 2014 - 02:07:08 Jul 23, 2014 - 02:07:32 Jul 23, 2014 - 02:07:54 Jul 23, 2014 - 02:07:11 Jul 23, 2014 - 02:07:21 Jul 23, 2014 - 02:07:40 Jul 23, 2014 - 02:07:29 Jul 23, 2014 - 02:07:26 Jul 23, 2014 - 02:07:56 Jul 23, 2014 - 02:07:37 Jul 23, 2014 - 02:07:14 Jul 23, 2014 - 02:07:13 Jul 23, 2014 - 02:07:08 Jul 23, 2014 - 02:07:45 Jul 23, 2014 - 02:07:16
Newer

Hybrid Racing Shifter Cable Bushing Install

Written By: Hybrid Racing
  • Comments: 3
  • Favorites: 1

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

Flags

1

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Start by disconnecting the MAF sensor connector. Push down on the clip and slide off to disconnect. With a pair of needle nose pliers, squeeze the wire harness clip together while also pulling it away from the housing. Move the wiring out of the way. With a pair of needle nose pliers, squeeze the wire harness clip together while also pulling it away from the housing. Move the wiring out of the way.

    • Start by disconnecting the MAF sensor connector. Push down on the clip and slide off to disconnect.

    • With a pair of needle nose pliers, squeeze the wire harness clip together while also pulling it away from the housing. Move the wiring out of the way.

  2. With a 10mm socket, loosen the factory hose clamp on the factory air tube. Pull the air intake tube back and slide it off of the air box lid.

    • With a 10mm socket, loosen the factory hose clamp on the factory air tube.

    • Pull the air intake tube back and slide it off of the air box lid.

  3. Unhinge the air box lid. There are six hinges total. Remove the air box lid. Remove the air filter.

    • Unhinge the air box lid. There are six hinges total.

    • Remove the air box lid.

    • Remove the air filter.

  4. Using a 10mm socket, remove the bolts that hold the OEM air box in place. Remove the lower air tube by squeezing the end and pulling upwards.

    • Using a 10mm socket, remove the bolts that hold the OEM air box in place.

    • Remove the lower air tube by squeezing the end and pulling upwards.

    • Remove the air box assembly.

  5. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  6. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  7. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  8. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  9. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  10. Insert wisdom here. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

Author

Hybrid Racing

Member since: 4/29/14

14,019 Reputation

76 Guides authored

View Statistics:

Past 24 Hours: 3

Past 7 Days: 8

Past 30 Days: 40

All Time: 9,075