You're viewing a previously published revision of this guide. View latest revision

Jul 23, 2014 - 02:07:14

Oct 07, 2014 - 03:10:15 Aug 07, 2014 - 12:08:43 Aug 06, 2014 - 11:08:16 Aug 06, 2014 - 11:08:14 Jul 24, 2014 - 02:07:20 Jul 23, 2014 - 03:07:58 Jul 23, 2014 - 02:07:35 Jul 23, 2014 - 02:07:36 Jul 23, 2014 - 02:07:02 Jul 23, 2014 - 02:07:07 Jul 23, 2014 - 02:07:51 Jul 23, 2014 - 02:07:15 Jul 23, 2014 - 02:07:39 Jul 23, 2014 - 02:07:36 Jul 23, 2014 - 02:07:08 Jul 23, 2014 - 02:07:32 Jul 23, 2014 - 02:07:54 Jul 23, 2014 - 02:07:11 Jul 23, 2014 - 02:07:21 Jul 23, 2014 - 02:07:40 Jul 23, 2014 - 02:07:29 Jul 23, 2014 - 02:07:26 Jul 23, 2014 - 02:07:56 Jul 23, 2014 - 02:07:37 Jul 23, 2014 - 02:07:14 Jul 23, 2014 - 02:07:13 Jul 23, 2014 - 02:07:08 Jul 23, 2014 - 02:07:45 Jul 23, 2014 - 02:07:16

Newer

Hybrid Racing Shifter Cable Bushing Install

Written By: Hybrid Racing

Comments: 3
Favorites: 1

Hybrid Racing Shifter Cable Bushing Install

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Hybrid Racing Shifter Cable Bushing Install

Start by disconnecting the MAF sensor connector. Push down on the clip and slide off to disconnect.

With a pair of needle nose pliers, squeeze the wire harness clip together while also pulling it away from the housing. Move the wiring out of the way.

Start by disconnecting the MAF sensor connector. Push down on the clip and slide off to disconnect.
With a pair of needle nose pliers, squeeze the wire harness clip together while also pulling it away from the housing. Move the wiring out of the way.